Thursday, 3 August 2017
FIX DEADBOOT NO RECOVERY NO FASTBOOT FORMATTED WHILE IN QPST MODE
FIX DEADBOOT NO RECOVERY NO FASTBOOT FORMATTED WHILE IN QPST MODE
REQUIREMENTS:
- Dead-Boot FLARE(S100) but still detected in device manager (Unknown Device or in COM PORTS).
- USB Cable.
- Jellybean/ICS Driver
- Laptop / PC Running Windows. I�ve tested this using windows XP SP3 and Windows 7 32bit SP1.
- Qualcomm Product Support Tools. I�ve tested this using version 2.7 build 399.
- Jellybean BP Firmware.
- Jellybean Image Dump
- Best of all Common Sense.
DOWNLOAD LINKS:
- QPST 2.7 built 399.: Download
- Jellybean Driver.: Download
- ICS Driver: Download
- Jellybean BP Firmware: Download
PROCEDURE:
- Extract QPST-2.7.399.rar and run SETUP.EXE
- Run SETUP.EXE. press install when it prompt to install additional Visual C++ runtime libraries. Follow the defaults, press NEXT until it finish the installation.
- Connect Deadboot Flare(s100) to Computer / Laptop.
- Go to device manager, expand PORTS (COM & LPT). Check if there is an item called Qualcomm HSUSB QDLOADER 9008. if the item is there, you are done with the driver install.
- If there is no item under PORTS(COM &LPT), check device manager under �Other Device>Unknown Device�.
- Double Click �Unknown Device > Update Driver > Browse My Computer� Browse to the where you saved extracted Jellybean / ICS Drivers. It will install the driver, if it prompts for unsigned drivers, press �Install Anyway�.
- It should be now listed under COM PORTS > Qualcomm HSUSB QDLOADER 9008.
RUN QPST AND RE-PROGRAM EMMC:
note: If you are using Windows 7, make sure you run it under compatibility mode in Windows XP SP3, and run as Administrator.
- Run EMMC Software Download.
- Press Browse, it will detect your phone. Look for the PHONE TAB that says DOWNLOAD and press OK.
- Put check mark on �Program bootloaders, Program MMC Device, Trusted�.
- Under �Flash Programmer File name� , select �MPRG8X25.hex.
- Under �Boot Image�, enter 8X25_msimage.mbn.
- Press Load XML Def, navigate to your extracted JB Firmware, select rawprogram0, press OPEN.
- Press Load Patch Def, navigate to your extracted JB Firmware, select patch0, then press OPEN.
- Press DOWNLOAD
- A warning message may appear, �Timeout Waiting� etc. or �Cookie not Received, if the error is �Timeout Waiting� Press OK and then press �Switch Device to Load, check your phone (S100), it will show �Reset for entry QPST�.
- Exit EMMC Software Download. Proceed to Flash Jellybean BP Firmware and then Flash Jellybean IMG Dump.
�If error is COOKIE NOT RECEIVED, Sorry it is still bricked�.
�This tutorial will also fix CWM formatted boot partition�
Creditsryanrudolf tcp / tpc / symb / xda / modaco From : CHERRY MOBILE FLARE PH (OFFICIAL) Facebook Group
Get paid to share your links!
download file now
