DOWNLOAD TECNO CAMON CX X688 STOCK ROM

Tuesday, 26 September 2017

DOWNLOAD TECNO CAMON CX X688 STOCK ROM

Below is the direct link to download the Tecno Camon CX X688 Stock ROM (Firmware).

Note:
Follow the instructions on how to flash this device carefully, I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because flashing a wrong preloader will make the device completely dead (cant power on, cant charge and will not be detected by a computer).

TECNO CAMON CX X688 SPECS

Operating System	Android 7.0 (Nougat)
Chipset	Spreadtrum SC7731c
Processor	CPU: 1.5GHz Quad-core, GPU:
Storage	RAM: 1GB, ROM: 16GB, up to 128GB micro SD
Dimension	125 x 64.1 x 10.8 mm
Connectivity	Wi-Fi: 802.11 b/g/n, Wi-Fi hotspot, 2G: GSM, 3G: HSDPA, 4G: LTE - Bluetooth v4.2
Camera	Rear Camera: 16MP, Front Camera: 16MP
Battery Capacity	1150mAh

TECNO CAMON CX X688 STOCK ROM
Camon_X688_v01_20170119 DOWNLOAD ROM

How To Flash

Using ResearchDownload or UpgradeDownload Tool:

STEP 1: Download & extract the Stock ROM (Firmware) on your computer.
STEP 2: Install the USB Drivers (skip this step if drivers are already installed).
STEP 3: Launch ResearchDownload or UpgradeDownload.
STEP 4: Click on the Settings-like button above Port.
STEP 5: Select the PAC File from the Stock ROM (Firmware) you have downloaded.
STEP 6: Click on Start button.
STEP 7: Connect device >> holding volume + and volume - button of your device at the same time or holding power button only.
STEP 8: Patiently wait for the process to complete.
See Detailed Instruction with images

Using Miracle Box:
STEP 1: Download & extract the Stock ROM (Firmware) on your computer.
STEP 2: Install the USB Drivers (skip this step if drivers are already installed).
STEP 3: Launch Miracle Box.
STEP 4: Click on SPD.
STEP 5: Select Write.
STEP 6: Select device Chip from Choose type.
STEP 7: Click on the folder-like button to select Stock ROM (Firmware) on the location it is saved.
STEP 8: After Selecting Stock ROM (Firmware),
STEP 9: Click on the Start button.
STEP 10: Connect device holding volume + and volume - key or power key only.
STEP 11: When device is connected, Select Block will pop-out, Click OK.
STEP 12: Patiently wait while the process completes.
See Detailed Instruction with images

Important Notes:

[*] It is always advisable to backup the Stock ROM (Firmware) of the device you are about to flash unless the device is completely dead (cant power on).

==>> Learn how to backup Stock ROMs (Firmwares) Before flashing from here

[*] Take a Backup of your personal data before flashing or installing any Stock ROM (Firmware) or Flash file on your smartphone. As this helps you to recover the personal data when ever any thing wrong happens.

[*] Make sure you read & follow this tips & guides before you completely proceed to flashing your device. This tips are very important to be ignored.

Please Leave a comment after using this ROM
Report it you cannot download this file.

download file now