Showing posts with label dtv. Show all posts
Showing posts with label dtv. Show all posts
Sunday, 17 September 2017
Cherry Mobile Flare J2 DTV Firmware ROM
Cherry Mobile Flare J2 DTV Firmware ROM
This Cherry Mobile Flare J2 DTV Firmware Rom is back-up using CM2 Spreadtrum tool
And perform by me and already convert to PAC files
For helping others who need this Firmware without CM2 spreadtrum tools FREE!
The PAC files Rom is ready to load to SPD_Upgrade_Tool_R17.0.0001
The PAC files Rom is ready to load to SPD_Upgrade_Tool_R17.0.0001
which a free tool can be download below post.
The figure image on top picture shows the actual unit of Cherry Mobile Flare J2 DTV
The figure image on top picture shows the actual unit of Cherry Mobile Flare J2 DTV
Which the firmware was backup using CM2 read/convert to PAC image firmware button.
Here some Logs may viewers will need to understand what Backup ROM about using CM2.
---------------
==== Wait for phone...------------------
Phone found! [ 61 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
- > Wait phone connected ...
Phone found! [ 61 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
- > Wait phone connected ...
Phone found! [ 61 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name : pike_xx08
Model Brand : cherry_mobile
Model Device: Flare_J2_DTV
AndrVersion : 6.0
BaseBand CPU: SP7731CEA
Project Ver : Cherry_Flare_J2_DTV_091416_V01
Model Ext : Flare_J2_DTV
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 2137 MiB
Saved to : SP7731CEA_Flare_J2_DTV_6.0_Cherry_Flare_J2_DTV_091416_V01_Flare_J2_DTV
Done!
Cherry Mobile Flare J2 DTV Firmware Rom is a stockrom which already hard reset before backup.
Before i was backup the ROM, The problem of this unit is google verification.
AKA FRP problem,
Its totally remove the FRP condition via CM2 tools and after successful test,
I backup as pac.sc and i said before i convert it into PAC file image.
We can use to flash-back this Firmware Rom via PC/laptop and tools that have
PAC image file support load,
Must better use CM2 tools which is back-up this ROM
If you dont have Cm2, You can use try Upgrade Download,
If you dont have Cm2, You can use try Upgrade Download,
Read more step by step about what Free Tools and download at Link below
SPD_Upgrade_Tool_R17.0.0001
Be sure you read and understand the info backup Firmware
and step by step before proceeding to program your device.
Firmware can use to same model about have problem about software related problem Hang, no power, password, pattern lock , infected by virus, anything about software related.
Best safe way is manual select flash the SYSTEM ANDROID file only.
Do it at your own risk,
After flashing ! the device is set to automatic in reset condition,
All your user-data is lost.
Make sure back-up important data before to proceed flashing your phone.
Download This Firmware
Firmware PAC image Size : 2137 MiB extracted
The file is split into 2 parts because of large file
Download Part 1
Download Part 2
Download Part 1
Download Part 2
Place the two parts inside folder directory then extract it
This Rare ROM is FREE ! no password
Thats all! i go now and get some drinks ^_^
1. To Download allow ads pop-up of your browser
2. Wait 5 seconds and press skip button,
The two new Tab of browser appear
Other 1 that show your link and other 1 is ads
3. Subscribe on my blogs
download file now
Friday, 15 September 2017
MyPhone my96 DTV FIRMWARE ROM
MyPhone my96 DTV FIRMWARE ROM
Firmware Rom is backup using Chinese Miracle tool.
The figure image on top picture shows the actual unit of MyPhone my96 DTV
This firmware was revived from Google account verification Full erase user data.
After successful reprogram, i make it back-up the Full ROM
Firmware Info backup Chinese Miracle II (CM2 MTK Tool)
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : MyPhone
Device Model : MyPhone_my96_DTV
Device CPU : MT6737M
Device IntName : my96_DTV
Device Version : 6.0
Device Compile : 12/28/2016 11:52:54 AM
Device Project : alps-mp-m0.mp1-V2.84_mlt6737m.35g.m0_P10
Device ExtInfo : MyPhone my96 DTV
The MyPhone my96 DTV ROM is backup as scatter file
can be flash back using any Mediatek tool if you dont have CM2.
It can be flash back using any Mediatek tool that support scatter base loader.
ROM support scatter base file like SP flash Tool link below.
How to Flash Firmware step by step procedure
As see the figure below show a complete backup using CM2 tools
Firmware can use to same model about have problem about software related problem Hang, no power, password, pattern lock , infected by
virus, anything about software related.
Best safe way is manual select flash the SYSTEM ANDROID file only.
Do it at your own risk, After flashing ! the device is set automatic in reset condition, All user data is lost.
Make sure back-up first before to proceed flashing your phone.
The file is split in 2 file because of large file 2.57gb extracted
Download part 1 and part 2 then extract using 7z
MyPhone my96DTV part 1 - 650mb part
MyPhone my96DTV part 2 - 266mb part
Zip password
View text
download file now
Tuesday, 22 August 2017
Cherry Mobile FLARE S5 LITE DTV Firmware Stock Rom
Cherry Mobile FLARE S5 LITE DTV Firmware Stock Rom
 |
| Cherry Mobile FLARE S5 Lite DTV MT6580 |
Welcome to GSMSolutionPH, Here is the original stock rom for CM Flare S5 Lite DTV, this firmware is tested and originally backup from good model. Unfortunately error is the common problem, continue read below for more info.
Before flashing, you need to understand that all your files and installed third party application etc will be deleted and restore back to original as you bought it. Flashing new firmware will fixed only software problem, here is the list of the common problem that is tested to be solved in flashing the stock rom below;
- Cherry Mobile FLARE S5 LITE DTV Infected Virus - Also known as Monkey Virus where when you connect to Internet, there is automatically download apps or some popup screen and sometimes automatically turn on WiFi or data connection without doing it. The virus will not remove though hard reset or formatting your phone. Installing new firmware is the best solution.
- Cherry Mobile FLARE S5 LITE DTV Unfortunately Error - This is when you open some apps it will popup Unfortunately, App has stopped. If cannot fixed through clearing the data, then flashing new firmware is also the solution.
- Cherry Mobile FLARE S5 LITE DTVStuck or Hang in Logo - The reason for this is either when you install incorrect Rom. Try to hard reset first but if still stuck, then flashing firmware is also the solution
- Cherry Mobile FLARE S5 LITE DTV Too Many Pattern Attempts or forgot password - This is just an alternative solution if you cannot hard reset your android phone.
- Cherry Mobile FLARE S5 LITE DTV boot loop.
Download CM Flare S5 Lite DTV Firmware
Password: moxxxgsmsandwich
Thanks and credit to: MOXXX
How to flash Android phone using SP Flash tool
What we need?
- PC
- Firmware/ROM, SP Flashtool and MTK Drivers
- USB Cable
- Smartphone with 30 to 50 percent battery charged
Driver Installation
Flashing phone need to install driver first in order to connect and to be able to flash firmware, we will be install MTK driver in to different way, choose only one by using Auto Installer Drivers or MediaTek USB VCOM drivers.
Install Driver using Auto Installer Driver
Download Driver Auto Installer v1.1236.00
- After you download and extract, open the folder and you will see Install.bat
- Run and it will appear Windows Security window
- Click Install this driver software anyway
- It will appear many times and just click the same button.
Wait for CMD window to display Install complete that indicate that driver installation is successful.
Install Driver Using MediaTek USB VCOM drivers
Download MediaTek USB VCOM drivers
To manually install MediaTek USB VCOM drivers, you can follow this video:
Flashing Stock Rom in SP Flash tool
- Download Latest SP Flash tool here and extract to your desired location.
- Open the extracted file folder and run flash_tool.exe
- On Scatter-loading file, click the choose button to browse for the Android_Scatter.txt
- Follow the screenshot below in choosing android scatter file.Note: The given screenshot scatter file is for Starmobile UP firmware with MT6582, this may different to your downloaded firmware depend on what model of your phone. this is just a guide on how to flash Mediatek smartphone.
- After you select and load scatter file, either you see unchecked file, if you are not sure what you are doing, I suggest to Do not change anything. In below screenshot, the default CACHE and USRDATA is uncheck, if yours is checked, Just leave it default and do not unchecked.
- In flash tool Select Download Only Then click Download buttonIn your phone turn off first, or remove battery (if removable) because turn off is a must.
Then Press Volume up or Down or you can press them both Then insert USB Cable. If you see a Red Progress bar then the phone is detected.
if it continue to Yellow Progress bar then proceed to step 7.
- You will see a yellow progress bar, that means it start downloading. Just put down your phone because it may take few minutes.WARNING: Do not unplug or disconnect during this operation.
- And finally, it will popup a Download OK, that means the flashing new firmware is successful.
For Video tutorial, you can Watch in YouTube.
Now that you flash your new firmware, restart your phone and you can now setup settings and install your desired application. if you encounter some problem, please comment and we will help you.
NOTE: Starting up for the first time may took long.
6.1 Some phone that has a Virus infected encounter this warning;
PMT changed for the ROM; it must be downloaded. If you dont see this warning skip this and proceed to step 7.
to solve this, just follow the suggestion, Please Select "Format All + Download" Scene and try again the step 6.
PMT changed for the ROM; it must be downloaded. If you dont see this warning skip this and proceed to step 7.
to solve this, just follow the suggestion, Please Select "Format All + Download" Scene and try again the step 6.
Troubleshooting
FOR INVALID IMEI or Null IMEI
After you flash new firmware and try to dial *#06# to check your IMEI you will see INVALID or null Just follow How to Fix/Solve Invalid IMEI in safest method.
download file now
Subscribe to:
Posts (Atom)