Game tester online

Solution Of Samsung Galaxy J7 Prime Backlight Ways Display Jumper

Samsung Galaxy J7 Prime G610F Display has connected the motherboard with a cable connector. If your LCD is not working, you obviously have to check if a faulty LCD is not causing this problem. If the LCD is okay then check the LCD connector.

If you ever already been tried to replace a new replacement LCD screen and new flex cable wire and nothing happens but the display problem still exists like black screen display, blue screen display, white screen display, garbled and saturated screen display.

Before you may proceed, you need to make sure first that the flex cable and the LCD are working fine or you have it tried with new replacement installed but nothing happens.

Note: this solution covers only for hardware repair and may not help on software related issues. 

 Here is the Solution for IPHONE 4G CHARGING & BATTERY WAYS Jumper Diagram
 


 IPHONE 4G CHARGING & BATTERY WAYS Jumper Diagram
 IPHONE 4G CHARGING & BATTERY WAYS
 IPHONE 4G CHARGING Solution
 IPHONE 4G CHARGING problem charging solution
 IPHONE 4G CHARGING solution diagram
 IPHONE 4G  BATTERY WAYS Jumper Diagram

all rights reserved to the respective owners mobiletech & stkrom.com

Nokia 114 Display Light Ways Lcd Jumper SolutionNokia 114 Full Lcd Ways White Showcase Issue Jumper Arrangement

In the occasion that accomplished examining show issue on Nokia 114 like blue screen, white screen, clear or release screen displays.You ought to first endeavor to present another substitution LCD screen module of Nokia 114

Moreover endeavor to reestablish or update the flicker firmware.

If the above techniques does not adjust the showcase issue on Nokia 114. Insinuate the game plan underneath for it shows an expedient manual for finding certain portions on Nokia 114 that may achieve the issue.

To settle the dull screen show issue, you may first attempt to supplant or introduce another Showcase screen module, to effectively affirm if the LCDs backdrop illumination Droves were all the while working or officially harmed.

You can likewise check the Droves utilizing the multimeter on the off chance that you can oversee without harming the LCD flex connector.

In the event that the recently introduced LCD still demonstrates the same issue and the Drove light doesnt illuminate, allude to the arrangement beneath and find the highlighted parts on the PCB board.

Samsung Galaxy On7 G600FY is surely new in this market, but you can encounter problems with it due to any of the reasons. One of the most common problems faced by Samsung G600FY users is the microphone issue which normally arises due to water damage or moisture.

Microphone not working at all.

The distracted sound is recorded via Mic.

A distracted sound is received by the other party when talking on a call.

MIC mutes randomly and at any point.

MIC goes cute on call while it works well during voice recording.

If you are looking for temporary workaround then all you have to do is to use the speakerphone, as it uses the different microphone in its operation.

Hardware Solution

Dry your Samsung Galaxy On7 G600FY with a dry towel to eliminate any visible traces of water or moisture.

Remove battery

Clean all the openings (Headphone port, Charging port etc.) with the help of cotton buds in order to eliminate all possible traces of water and moisture completely.

MIC might have encountered any kind of physical or water damage.

MIC is faulty.

The rubber cap of MIC is out of order or is displaced from its correct location.

MIC might be too much dusty or dirty, hence causing above mentioned problems.

Dry soldering of MIC connectors could also be the reason of this problem.

Microphone IC might be faulty.