First, you need to download and install SP flash tool
Download and install MTK Android USB drivers
Then download Firmware file/Flash file/ROM for your phone
Your phone must have 50 % charging before this process,
switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
Now open SP flash tool.exe
When SP flash tool open, go to download button in SP flash tool
In download tab, click on scatter load button
After locating the scatter tab, click on the download button
Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
Now flashing is completed, a green ring will appear in SP flash tool
Close SP flash tool on your computer and unplug phone
Power on the phone and enjoy
After flashing process, starts, it might take up to 5-10 minutes. So, keep patience and wait.
See detailed Instruction MT flashing SP tool with images
Analysis of USB port,Please insert phone USB cable. Connecting� Hardware version:CB01 So,ftware version:0001 CPU TYPE:6261 Internal version:8000
Boot downloading complete! Flash ID: 0040000000EF0070 Chip Capacity: 0x400000(4MB) Mobile phone software version for:T2014_VERSION Baud adjust�complete. Flash reading complete! privacy:0000 >>The data has been saved in C:UsersafzalDesktopmaxx mega m1KEYTAK61D_GB_11C_PCB01_gprs_MT6261_S00.T2014_VERSION.bin, size: 4 M.
How To Flash Maxx Mega M1
its a bin flash file and you can flash it with any flashing box or flash tool which is support to flash MT6261 Chip.
1. Remove battery. Insert USB cable 2. Press and hold BootKey ( Skip, if use BootCable ) 3. Insert battery
==== Wait for phone�
Phone found! [ 93 ] Port Opened Sync� InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync� Sending boot � Boot Sent , starting� Boot Ver : Spreadtrum Boot Block version 1.2 Boot Ok CPU ID : 6531 , FDLStat : 0100 [0] Flash DIE : 00C8 0060 0016 0000 [0] Flash VEN : GigaDevice , GD25LQ32 [0] Flash CAP : 00400000 Read Flash Content Read Ok , collect info Set FileInfo : Model Vendor : Maxx Model Name : T3 ExtInfo Data : urdu Saved to : C:InfinityBoxCM2SPDRead_outSPD6531_00400000_GD25LQ32_urdu__Maxx-T3.bin Done!
Elapsed: 00:00:49
Reconnect Power/Cable!
How To Flash Maxx T3
its a bin flash file and you can flash it with any flashing box or flash tool which is support to flash SPRD6531 Chips Done!
First, you need to download and install SP flash tool
Download and install MTK Android USB drivers
Then download Firmware file/Flash file/ROM for your phone
Your phone must have 50 % charging before this process,
switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
Now open SP flash tool.exe
When SP flash tool open, go to download button in SP flash tool
In download tab, click on scatter load button
After locating the scatter tab, click on the download button
Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
Now flashing is completed, a green ring will appear in SP flash tool
Close SP flash tool on your computer and unplug phone
Power on the phone and enjoy
After flashing process, starts, it might take up to 5-10 minutes. So, keep patience and wait.
See detailed Instruction MT flashing SP tool with images
First, you need to download and install SP flash tool
Download and install MTK Android USB drivers
Then download Firmware file/Flash file/ROM for your phone
Your phone must have 50 % charging before this process,
switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
Now open SP flash tool.exe
When SP flash tool open, go to download button in SP flash tool
In download tab, click on scatter load button
After locating the scatter tab, click on the download button
Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
Now flashing is completed, a green ring will appear in SP flash tool
Close SP flash tool on your computer and unplug phone
Power on the phone and enjoy
After flashing process, starts, it might take up to 5-10 minutes. So, keep patience and wait.
See detailed Instruction MT flashing SP tool with images
Download and Install Spreadtrum USB Driver on your Computer
Download and Spreadtrum Upgrade Toolon your computer
How To Flash Maxx AX5i Duo
Download and Install Spreadtrum USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then Skip this Step.
Download .pac firmware for your device (Itel, other)
Download and extract Spreadtrum Upgrade Tool on your computer.
Now, open UpgradeDownload.exe. Once Spreadtrum Upgrade Tool launched, connect your Android device to the computer (make sure your device is switcheded off).
If Smartphone is securely attached to the computer, click on the Load Packed Button and add the .pac file (stock ROM which comes as .pac).
Having successfully added the.Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.
During the flashing process,, your device will restart automatically.
Once flashing completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
Now you have successfully flashed your Android Device using Spreadtrum Upgrade Tool.
Note after flashing phone on must 5 to 10 mins.
During the flashing process,, your device will restart automatically. Once flashing completed, you will be able to see the Green Passed Message in SPD Upgrade Tool
After flashing process, starts, it might take up to 5-10 minutes. So, keep patience and wait
See detailed Instruction Spreadtrum Upgrade Tool with images
First, you need to download and install SP flash tool
Download and install MTK Android USB drivers
Then download Firmware file/Flash file/ROM for your phone
Your phone must have 50 % charging before this process,
switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
Now open SP flash tool.exe
When SP flash tool open, go to download button in SP flash tool
In download tab, click on scatter load button
After locating the scatter tab, click on the download button
Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
Now flashing is completed, a green ring will appear in SP flash tool
Close SP flash tool on your computer and unplug phone
Power on the phone and enjoy
After flashing process, starts, it might take up to 5-10 minutes. So, keep patience and wait.
See detailed Instruction MT flashing SP tool with images
Maxx AX5 Plus Android 4 0 Firmware Flash File Free
MAXX AX5 PLUS ANDROID 4.0 FIRMWARE FLASH FILE
Maxx AX5 Plus Android 4.0 Firmware Flash File
First step to Install Firmware
Download and install MTK Android USB drivers
Download And Install SP Flash Tool
How To Flash Maxx AX5 Plus
First, you need to download and install SP flash tool
Download and install MTK Android USB drivers
Then download Firmware file/Flash file/ROM for your phone
Your phone must have 50 % charging before this process,
switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
Now open SP flash tool.exe
When SP flash tool open, go to download button in SP flash tool
In download tab, click on scatter load button
After locating the scatter tab, click on the download button
Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
Now flashing is completed, a green ring will appear in SP flash tool
Close SP flash tool on your computer and unplug phone
Power on the phone and enjoy
After flashing process, starts, it might take up to 5-10 minutes. So, keep patience and wait.
See detailed Instruction MT flashing SP tool with images
First, you need to download and install SP flash tool
Download and install MTK Android USB drivers
Then download Firmware file/Flash file/ROM for your phone
Your phone must have 50 % charging before this process,
switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
Now open SP flash tool.exe
When SP flash tool open, go to download button in SP flash tool
In download tab, click on scatter load button
After locating the scatter tab, click on the download button
Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
Now flashing is completed, a green ring will appear in SP flash tool
Close SP flash tool on your computer and unplug phone
Power on the phone and enjoy
After flashing process, starts, it might take up to 5-10 minutes. So, keep patience and wait.
See detailed Instruction MT flashing SP tool with images
Download and Install Spreadtrum USB Driver on your Computer
Download and Spreadtrum Upgrade Toolon your Computer
How To Flash Maxx AXD10
Download and Install Spreadtrum USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then Skip this Step.
Download .pac firmware for your device (Itel, other)
Download and extract Spreadtrum Upgrade Tool on your computer.
Now, open UpgradeDownload.exe. Once Spreadtrum Upgrade Tool launched, connect your Android device to the computer (make sure your device is switcheded off).
If Smartphone is securely attached to the computer, click on the Load Packed Button and add the .pac file (stock ROM which comes as .pac).
Having successfully added the.Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.
During the flashing process,, your device will restart automatically.
Once flashing completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
Now you have successfully flashed your Android Device using Spreadtrum Upgrade Tool.
Note after flashing phone on must 5 to 10 mins.
During the flashing process,, your device will restart automatically. Once flashing completed, you will be able to see the Green Passed Message in SPD Upgrade Tool
After flashing process, starts, it might take up to 5-10 minutes. So, keep patience and wait
See detailed Instruction Spreadtrum Upgrade Tool with images
First, you need to download and install SP flash tool
Download and install MTK Android USB drivers
Then download Firmware file/Flash file/ROM for your phone
Your phone must have 50 % charging before this process,
switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
Now open SP flash tool.exe
When SP flash tool open, go to download button in SP flash tool
In download tab, click on scatter load button
After locating the scatter tab, click on the download button
Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
Now flashing is completed, a green ring will appear in SP flash tool
Close SP flash tool on your computer and unplug phone
Power on the phone and enjoy
After flashing process, starts, it might take up to 5-10 minutes. So, keep patience and wait.
See detailed Instruction MT flashing SP tool with images
First, you need to download and install SP flash tool
Download and install MTK Android USB drivers
Then download Firmware file/Flash file/ROM for your phone
Your phone must have 50 % charging before this process,
switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
Now open SP flash tool.exe
When SP flash tool open, go to download button in SP flash tool
In download tab, click on scatter load button
After locating the scatter tab, click on the download button
Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
Now flashing is completed, a green ring will appear in SP flash tool
Close SP flash tool on your computer and unplug phone
Power on the phone and enjoy
After flashing process, starts, it might take up to 5-10 minutes. So, keep patience and wait.
See detailed Instruction MT flashing SP tool with images
Download and install MTK Android USB drivers Download And Install SP Flash Tool
How To Flash Maxx AX9Z Race
First, you need to download and install SP flash tool
Download and install MTK Android USB drivers
Then download Firmware file/Flash file/ROM for your phone
Your phone must have 50 % charging before this process,
switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
Now open SP flash tool.exe
When SP flash tool open, go to download button in SP flash tool
In download tab, click on scatter load button
After locating the scatter tab, click on the download button
Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
Now flashing is completed, a green ring will appear in SP flash tool
Close SP flash tool on your computer and unplug phone
Power on the phone and enjoy
After flashing process, starts, it might take up to 5-10 minutes. So, keep patience and wait.
See detailed Instruction MT flashing SP tool with images
First, you need to download and install SP flash tool
Download and install MTK Android USB drivers
Then download Firmware file/Flash file/ROM for your phone
Your phone must have 50 % charging before this process,
switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
Now open SP flash tool.exe
When SP flash tool open, go to download button in SP flash tool
In download tab, click on scatter load button
After locating the scatter tab, click on the download button
Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
Now flashing is completed, a green ring will appear in SP flash tool
Close SP flash tool on your computer and unplug phone
Power on the phone and enjoy
After flashing process, starts, it might take up to 5-10 minutes. So, keep patience and wait.
See detailed Instruction MT flashing SP tool with images
